Pular para o conteúdo principal

Error Code 236 - CR805, CR805 CLM, CR825, CR825 FCP

Resumo

Flipper module rotate error


Error Message no. 236
Message text Flipper module rotate error
Severity Error
Recovery Text The flipper did not reach the required position.
  1. Open the printer access door.
  2. Press the K3 rear access door release to open the rear access door.
  3. Reach in and rotate the flipper module until the card is accessible.
  4. Remove the card through the rear access door.
  5. Close the rear access door and then close the printer access door.