Remove print ribbon. Remove the print ribbon. 1. Open the printer and remove the ribbon cartridge. 2. Close the printer. 3. Press the user button to continue.

Printhead disconnected. No printhead was detected. Power down the printer and contact service.

Improper shutdown. The printer was not shut down properly. Press and hold the User button to set the printer to Ready. Always use the Power button to power off the printer.Click OK on the PC to clear ...

Settings error. One or more settings could not be updated. Update the setting values and try the update again. Click OK in the Card Printer Driver message.

Cleaning required. Clean the printer.

Configuration error. The configuration is not compatible with the printer model. The printer cannot print cards until the configuration issue is corrected. Contact your service provider for assistance...

Supply region not valid. The printer cannot use the supply installed. The card will be canceled. Use a supply with the correct code for your region.

Insert cleaning card. Insert cleaning card.If the card is not immediately picked, press the printers User button or click OK

Insert same card side 1 up. Take the card from the printer and turn it over end to end so side 1 is facing up.Insert the card in the printer.If the card is not immediately picked, press the printers U...

Insert new card side 1 up. Insert a new card in the printer with side 1 facing up.If the card is not immediately picked, press the printers User button or click OK