Input Hopper Jam at exit. A card remained at the multi-hopper exit and did not reach the print unit. OR After a card jam, the card was cleared by pushing it out of the multi-hopper to be deposited in ...

Input Hopper Jam print input. A card is already at the entrance of the print unit. Remove the card.

Input Hopper Jam card at exit. A card is already at the hopper exit when a new card was to be picked. Remove the card.

Laser position error. The laser card frame failed to position properly. Press the User button to move the card into the reject tray and clear the error.If the error occurs again, unlock and open the l...

Input Hopper problem. Power the printer off and back on. If the message displays again, contact your service provider for assistance.

Move retransfer film one panel.

Retransfer film out. Install the retransfer film. Press the User button to clear the message.

Ink ribbon out. Install the ink ribbon. Press the User button to clear the message.

Set print unit to download. The printer firmware is being updated. Refer to the Print Unit Front Panel section in the printers Users Guide for information about how to set the printer to accept the fi...

Ink ribbon problem. The ink ribbon is broken or not usable. Refer to the printers Users Guide for information about repairing the ink ribbon. Press the User button to clear the message.