| Entrust

Error Code 178 - CL900

Summary

Card blocking exit sensors

Summary

C2 supply out or missing

Error Message no.	166
Message text	C2 supply out or missing
Severity	Warning
Recovery Text	The C2 retransfer film is missing or out of material. 1. Open the printer access door and remove the C2 retransfer film cartridge. 2. Replace the retransfer film. 3. Replace the C2 retransfer film cartridge. 4. Close the printer access door.

Summary

Insert new card side 1 up

Error Message no.	170
Message text	Insert new card side 1 up
Severity	Warning
Recovery Text	1. Insert a new card in the printer with side 1 facing up. 2. If the card is not immediately picked, press the printer's User button or click OK.

Summary

Check print unit front panel

Error Message no.	158
Message text	Check print unit front panel
Severity	Error
Recovery Text	A number of issues can cause this message to display. Refer to the printer's User's Guide for complete recovery information.

Summary

Failed to lock

Error Message no.	151
Message text	Failed to lock
Severity	Critical
Recovery Text	An attempt to lock the printer failed. The card will be canceled. Make sure that all access doors are closed securely. Try locking the printer again.

Summary

Card blocking exit sensors

Summary

Insert same card side 1 up

Summary

Insert cleaning card to continue

Summary

Ink ribbon out

Error Message no.	165
Message text	Ink ribbon out
Severity	Error
Recovery Text	Install the ink ribbon. Press the User button to clear the message.

Summary

Input Hopper Jam print input

Error Message no.	191
Message text	Input Hopper Jam print input
Recovery Text	A card is at the entrance of the print unit during a hopper reset. Remove the card.