Printer problem. The printer had an error. The card will be canceled. 1. Press the printer Power button to power off the printer. 2. Press the Power button again to power on the printer.
Indent ribbon break. The embosser indent ribbon is not moving properly. 1. Open the embosser and remove the indent ribbon cartridge. 2. Reposition, repair, or replace the ribbon and advance the repair...
Topping foil out. The embosser does not have usable topping foil. 1. Open the embosser and remove the topping foil cartridge. 2. Install new topping foil. 3. Replace the cartridge, and then close and ...
Insert cleaning card in H2. 1. Unlock the multi-hopper if locks are installed. 2. Remove unused cards and insert the cleaning card in hopper 2. 3. Close and lock (if installed) the multi-hopper. 4. Pr...
Topping foil problem. The embosser topping foil is not moving properly. The card will be canceled. 1. Open the embosser and remove the topping foil cartridge. 2. Reposition, repair, or replace the top...
Indent ribbon supplies out. The embosser does not have usable indent ribbon. 1. Open the embosser and remove the indent ribbon cartridge. 2. Install a new indent ribbon. 3. Replace the cartridge, and ...
Embosser card exit jam. The card path is blocked in the embosser. 1. Open the embosser and remove the supply cartridges. 2. Remove any cards found. 3. Replace the cartridges. 4. Close and lock the emb...