Card not in position. The card is not positioned in the printer correctly. Open the printer and remove the ribbon cartridge.Turn the knob to remove the card.Replace the ribbon cartridge and close the ...
Request not supported. The printer does not support the personalization being requested for the card. The card will be canceled. Change the card data to match the printers options and settings. Or Pri...
Laser horizontal data error. There is an error in the ConCAD or image generator template. The laser horizontal tilt position is out of range. The card will be canceled. Modify the template setup to ma...
IIDaaS ribbon in IFI printer. The IIDaaS print ribbon installed is not intended for use in this printer model. Replace the print ribbon with an IFI compatible ribbon type. Press the User button to con...
Magstripe data not found. The printer did not find magnetic stripe data on card. Make sure that you are using magnetic stripe cards that match the printer settings.Make sure that the cards are placed ...
Magstripe read no data. The printer did not find any magnetic stripe data on the card. The card will be canceled. 1. Make sure that you are using magnetic stripe cards that match the printer settings....
RIM lost card. The card cannot be located in the Rear Indent Module. Power off and unplug the printer and RIM.Remove the RIM supply and the RIM from the printer.Rotate the drive gear to move the card ...
RIM card jam. The card is not in position in the Rear Indent Module. Power off and unplug the printer and RIM.Remove the RIM supply and the RIM from the printer.Rotate the drive gear to move the card ...
LCM card jam. The card is not in position in the LCM. 1. Open the LCM door. 2. Rotate the transport knob counter-clockwise at least 6 turns to move the card out the rear of the LCM. 3. Close the LCM d...
