| Entrust

Error Code 101 - CL900

Summary

Job could not complete

Error Message no.	101
Message text	Job could not complete
Severity	Critical
Recovery Text	The card took too much time to complete. The card will be canceled.

Summary

Print ribbon problem

Error Message no.	109
Message text	Print ribbon problem
Severity	Error
Recovery Text	The print ribbon is not moving properly. 1. Open the printer and remove the ribbon cartridge. 2. Reposition, repair, or replace the ribbon and advance the repaired area one full turn. 3. Replace the ribbon cartridge and close the printer.

Summary

Print ribbon out or missing

Summary

Cover opened during job

Error Message no.	114
Message text	Cover opened during job
Severity	Critical or Error
Recovery Text	The printer cover was opened while printing. Close the printer cover completely.

Summary

Critical problem

Error Message no.	104
Message text	Critical problem
Severity	Critical
Recovery Text	The printer had a serious error. The card will be canceled. Press the printer Power button to power off the printer. The system must remain powered off. Request service.

Summary

Close cover to continue

Error Message no.	113
Message text	Close cover to continue
Severity	Warning
Recovery Text	The cover is open or the print ribbon cartridge is missing. Confirm that the print ribbon cartridge is installed and then close the cover.

Summary

Magstripe data not found

Error Message no.	106
Message text	Magstripe data not found
Severity	Error
Recovery Text	The printer did not find magnetic stripe data on card. 1. Make sure that you are using magnetic stripe cards that match the printer settings. 2. Make sure that the cards are placed in the printer correctly.

Summary

Print ribbon type problem

Summary

Close cover to continue

Error Message no.	113
Message text	Close cover to continue
Severity	Warning
Recovery Text	The cover is open or the print ribbon cartridge is missing. Confirm that the print ribbon cartridge is installed and then close the cover.

Summary

Request not supported

Error Message no.	100
Message text	Request not supported
Severity	Critical
Recovery Text	The printer does not support the personalization being requested for the card. The card will be canceled. Change the card data to match the printer's options and settings, or print to a printer that is configured to support the personalization being requested.