| Entrust

Error Code 284 - CD800, CD800 CLM, CD820

Summary

Impresser drive error

Error Message no.	284
Message text	Impresser drive error
Severity	Error
Recovery Text	The impresser die motor has an error. Open the impresser door. Make sure that the card or foil is not stuck to the die. Cancel the job. If the issue continues to occur, request service.

Summary

Cloud connection error (Note: This functionality will not be available until D3.17.3)

Error Message no.	244
Message text	Cloud connection error (Note: This functionality will not be available until D3.17.3)
Severity	Error
Recovery Text	The connection to the cloud server failed. *Need more information about what to do next*

Summary

L2 supply out or missing

Summary

Card indexer error

Summary

L2 supply problem

Summary

L2 supply type problem

Error Message no.	208
Message text	L2 supply type problem
Severity	Error
Recovery Text	The laminator cannot use the supply installed. Use supplies designed for this laminator.

Summary

Laser card exit jam

Error Message no.	266
Message text	Laser card exit jam
Severity	Error
Recovery Text	The card exit path is blocked in the laser. 1. Unlock and open the laser access door and the laser chamber door. 2. Remove any cards found. 3. Close the laser chamber door. 4. Close and lock the laser access door.

Summary

L1 heater roller problem

Error Message no.	215
Message text	L1 heater roller problem
Severity	Critical
Recovery Text	The laminator has encountered a critical error. The card will be canceled. 1. Press the printer Power button to power off the system. The system must remain powered off. 2. Request service.

Summary

C2 heat sensor error

Error Message no.	229
Message text	C2 heat sensor error
Severity	Critical
Recovery Text	The C2 retransfer heat sensor has encountered a critical error. The card will be canceled. 1. Press the printer Power button to power off the system. 2. Request service. The system must remain powered off.

Summary

Firmware version mismatch

Error Message no.	222
Message text	Firmware version mismatch
Severity	Critical
Recovery Text	The printer and attached component firmware versions are not compatible. The system cannot process cards until the firmware has been updated. Update both the printer and component to the latest firmware versions.