LCM lamp problem. The LCM has detected a problem with the lamp. Power off and restart the printer. If the issue continues to occur, request service.

UV ribbon requires LCM. The inserted UV ribbon requires an attached Light Cure Module (LCM) for curing. To resolve the issue: 1. Power off the printer. 2. Attach a rear Light Curing Module. 3. Power o...

LCM lamp drive problem. The LCM lamp drive has encountered a problem. 1. Power off the printer and LCM. 2. Open the LCM door. 3. Inspect lamp area for a warped or stuck card. 4. Close the LCM door. 5....

LCM fan problem. The LCM has detected a problem with a cooling fan. 1. Power off and unplug the printer and LCM. 2. Inspect enclosure fan to make sure it is not obstructed. 3. Plug in the power cords ...

Card not picked. The printer did not pick a card from the rear of the printer. To complete the current card: 1. Click the driver button. 2. Insert the card into the rear of the printer.

RIM card jam. The card is not in position in the Rear Indent Module. Power off and unplug the printer and RIM.Remove the RIM supply and the RIM from the printer.Rotate the drive gear to move the card ...

LCM service required. The attached Light Cure Module (LCM) is in need of periodic service to maintain high performance. Request service.

Rear module door opened. The rear module door was opened while it was processing a card. The card will be rejected.

Close rear module door. The rear module door is open. Close the door to resume card processing.

LCM door open. The LCM door is open. Close the door to continue.