RIM door open. The RIM door is open. Close the door to continue.

LCM card jam. The card is not in position in the LCM. 1. Open the LCM door. 2. Rotate the transport knob counter-clockwise at least 6 turns to move the card out the rear of the LCM. 3. Close the LCM d...

RIM Error. An unexpected error has occurred in the RIM. Power off and restart the printer.If the error occurs again, request service.

RIM Supply Error. A RIM supply problem has occurred or the cassette is out of ribbon. Remove supply cassette and address any issues with the supply or install a new supply cassette.

Card not picked. The printer did not pick a card from the rear of the printer. To complete the current card, click the driver button and insert the card into the rear of the printer.

Kiosk card lost. The card has been lost in the kiosk. Either the card was not hand fed into the kiosk successfully or a card was removed after a reject initiated.

Card not dispensed. The card dispensed by the kiosk was not taken by the user in the allotted time. The card has been rejected.

MH Cassette Missing. 1. Unlock the multi-hopper if locks are installed. 2. Install the missing cartridge. 3. Lock the multi-hopper if locks are installed.

Insert cleaning card in H2. 1. Unlock the multi-hopper if locks are installed. 2. Remove unused cards and insert the cleaning card in hopper 2. 3. Close and lock (if installed) the multi-hopper. 4. Pr...

Multi-hopper pick error. The multi-hopper did not pick a card from the input hopper cartridge. 1. Unlock the multi-hopper if locks are installed. 2. Remove each cartridge and make sure that cards are ...