Multi-hopper pick error. The multi-hopper did not pick a card from the input hopper cartridge. 1. Unlock the multi-hopper if locks are installed. 2. Remove each cartridge and make sure that cards are ...
MH cassette is missing. 1. Unlock the multi-hopper if locks are installed. 2. Install the missing cartridge. 3. Lock the multi-hopper if locks are installed.
Close cover to continue. The cover is open or the print ribbon cartridge is missing. Confirm that the print ribbon cartridge is installed and then close the cover.
Insert same card side 1 up. 1. Take the card from the printer and turn it over end to end so side 1 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the...
Print ribbon problem. The print ribbon is not moving properly. 1. Open the printer and remove the ribbon cartridge. 2. Reposition, repair, or replace the ribbon and advance the repaired area one full ...
Insert new card side 1 up. 1. Insert a new card in the printer with side 1 facing up. 2. If the card is not immediately picked, press the printers User button or click OK.
Card not in position. The card is not positioned in the printer correctly. Open the printer and remove the ribbon cartridge.Turn the knob to remove the card.Replace the ribbon cartridge and close the ...
K1 transport card jam. The card did not reach the required position on the K1 horizontal transport. The card will be canceled. Press the User button to move the card into the reject tray and clear the...