Error Code 153 - CD800, CD800 CLM, CD820
Summary
Insert same card side 2 up
Summary
Insert same card side 2 up
Summary
Card still in printer
| Error Message no. | 174 |
| Message text | Card still in printer |
| Recovery Text | RESERVED |
Summary
Printer was not shut down correctly.
Summary
Card still in printer
| Error Message no. | 174 |
| Message text | Card still in printer |
| Recovery Text | RESERVED |
Summary
Card not received
| Error Message no. | 179 |
| Message text | Card not received |
| Severity | Error |
| Recovery Text | The card was not moved out of the external card reader. Remove the card from the external card reader. |
Summary
Insert same card side 2 up
Summary
Insert same card side 2 up
| Error Message no. | 153 |
| Message text | Insert same card side 2 up |
| Severity | Warning |
| Recovery Text | 1. Take the card from the printer and turn it over end to end so side 2 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the printer's User button or click OK. |
Summary
Insert same card side 2 up
| Error Message no. | 153 |
| Message text | Insert same card side 2 up |
| Severity | Warning |
| Recovery Text | 1. Take the card from the printer and turn it over end to end so side 2 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the printer's User button or click OK. |
Summary
Firmware version mismatch
| Error Message no. | 222 |
| Message text | Firmware version mismatch |
| Severity | Critical |
| Recovery Text | The printer and attached component firmware versions are not compatible. The system cannot process cards until the firmware has been updated. Update both the printer and component to the latest firmware versions. |
Summary
Insert new card side 2 up
| Error Message no. | 152 |
| Message text | Insert new card side 2 up |
| Severity | Warning |
| Recovery Text | 1. Turn a new card over end to end so side 2 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the printer's User button or click OK. |