Summary
Cloud connection error (Note: This functionality will not be available until D3.17.3)
| Error Message no. | 244 |
| Message text | Cloud connection error (Note: This functionality will not be available until D3.17.3) |
| Severity | Error |
| Recovery Text | The connection to the cloud server failed. |
Summary
Laser not detected
| Error Message no. | 258 |
| Message text | Laser not detected |
| Severity | Error |
| Recovery Text | The laser was not detected during a laser operation. 1. Press the printer Power button to power off the printer. 2. Press the Power button again to power on the printer. If the problem occurs again, request service. |
Summary
Impresser lock error
| Error Message no. | 287 |
| Message text | Impresser lock error |
| Severity | Error |
| Recovery Text | RESERVED The impresser does not have locks. Reserved in case locks can be added in the future. |
Summary
Impresser lost card
| Error Message no. | 280 |
| Message text | Impresser lost card |
| Severity | Error |
| Recovery Text | The card cannot be located in the impresser.
|
Summary
Impresser heater problem
| Error Message no. | 220 |
| Message text | Impresser heater problem |
| Severity | Critical |
| Recovery Text | The laminator has encountered a critical error. The card will be canceled. 1. Press the printer Power button to power off the system. 2. Request service. The system must remain powered off. |
Summary
L2 heater sensor problem
| Error Message no. | 214 |
| Message text | L2 heater sensor problem |
| Severity | Critical |
| Recovery Text | The laminator has encountered a critical error. The card will be canceled. 1. Press the printer Power button to power off the system. 2. Request service. The system must remain powered off. |
Summary
Impresser lock error
| Error Message no. | 287 |
| Message text | Impresser lock error |
| Severity | Error |
| Recovery Text | RESERVED The impresser does not have locks. Reserved in case locks can be added in the future. |
Summary
L2 supply not identified
| Error Message no. | 210 |
| Message text | L2 supply not identified |
| Severity | Error |
| Recovery Text | The laminator cannot use the supply installed. Use supplies designed for this laminator. |
Summary
Insert cleaning card in H2
| Error Message no. | 278 |
| Message text | Insert cleaning card in H2 |
| Severity | Warning |
| Recovery Text | 1. Unlock the multi-hopper if locks are installed. 2. Remove unused cards and insert the cleaning card in hopper 2. 3. Close and lock (if installed) the multi-hopper. 4. Press the printer’s User button to pick the card. |
Summary
Laser control error
| Error Message no. | 260 |
| Message text | Laser control error |
| Severity | Error |
| Recovery Text | The laser had an error. 1. Press the printer Power button to power off the printer. 2. Press the Power button again to power on the printer. If the problem occurs again, request service. |
