Supply region not valid. The printer cannot use the supply installed. The card will be canceled. Use a supply with the correct code for your region.

Card not received. The card was not moved out of the external card reader. Remove the card from the external card reader.

Card blocking exit sensors. A card is blocking the Kiosk exit sensors. If an external card reader is connected to the embosser: Set up the external card reader to receive the card.Perform error recove...

C2 supply type error. The C1 ink ribbon and C2 retransfer film are not compatible. Replace one or both with known compatible supplies.

C2 supply error. The C2 retransfer film has encountered an error. Open the printer access door and remove the C2 retransfer film cartridge.Reposition, repair, or replace the supply and advance the rep...

Card still in printer. RESERVED

Improper shutdown. The printer was not shut down properly. Press and hold the User button to set the printer to Ready. Always use the Power button to power off the printer.Click OK on the PC to clear ...

Insert cleaning card. 1. Insert cleaning card. 2. If the card is not immediately picked, press the printers User button or click OK.

Insert same card side 1 up. 1. Take the card from the printer and turn it over end to end so side 1 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the...

Insert new card side 1 up. 1. Insert a new card in the printer with side 1 facing up. 2. If the card is not immediately picked, press the printers User button or click OK.