| Entrust

Error Code 293 - SD160, SD260L, SD260, SD260 Pink Printer Preview, SD360, SD460

Summary

Impresser door open

Error Message no.	293
Message text	Impresser door open
Severity	Error
Recovery Text	The impresser door is open. Close the door to continue.

Summary

Insert cleaning card in H2

Summary

Laminator system mismatch

Error Message no.	223
Message text	Laminator system mismatch
Severity	Critical
Recovery Text	The printer and laminator are not compatible. The laminator is not supported by your printer model. Contact your service provider for the correct laminator model.

Summary

Impresser foil error

Error Message no.	283
Message text	Impresser foil error
Severity	Error
Recovery Text	The impresser foil is not moving properly. Open the impresser door. Make sure that the foil is not broken; stuck to the card, impresser die, or the rollers; or prevented from moving. If the issue continues to occur, request service.

Summary

C2 heater error

Error Message no.	230
Message text	C2 heater error
Severity	Critical
Recovery Text	The C2 retransfer heater has encountered a critical error. The card will be canceled. 1. Press the printer Power button to power off the system. 2. Request service. The system must remain powered off.

Summary

Impresser supply error

Error Message no.	285
Message text	Impresser supply error
Severity	Error
Recovery Text	Need to select one of the following descriptions: The impresser foil cannot be identified. OR The impresser cannot use the installed impresser foil. Power down and restart the printer. If the error occurs again, replace the impresser cartridge.

Summary

Laser card output full

Error Message no.	271
Message text	Laser card output full
Severity	Warning
Recovery Text	The laser output hopper is full or blocked. Remove the cards from the laser output hopper.

Summary

Rewrite config mismatch

Summary

L2 supply type problem

Error Message no.	208
Message text	L2 supply type problem
Severity	Error
Recovery Text	The laminator cannot use the supply installed. Use supplies designed for this laminator.

Summary

Configuration error

Error Message no.	245
Message text	Configuration error
Severity	Critical
Recovery Text	The configuration is not compatible with the printer model. The printer cannot print cards until the configuration issue is corrected. Contact your service provider for assistance.