| Entrust

Error Code 286 - Sigma Tactile Impression Module

Summary

Impresser foil tag cannot be updated

Summary

Impresser firmware/hardware error

Error Message no.	289
Message text	Impresser error
Severity	Error
Recovery Text	An unexpected error has occurred in the impresser. Power off and restart the printer. If the error occurs again, request service. In the Card Printer Driver message, click Retry, or click Cancel to cancel the card.

Summary

Impresser module heater problem

Error Message no.	281
Message text	Impresser heater error
Severity	Critical
Recovery Text	The impresser has encountered a critical error. 1. Press the printer POWER button to power off the system. 2. Request service. The system must remain powered off. 3. Click OK to clear the message from the Card Printer Driver message on the PC.

Summary

Embosser cover is open

Summary

Emboss cover error

Summary

Impresser foil tag is not valid

Summary

Multi-hopper cassette is missing

Error Message no.	296
Message text	MH Cassette Missing
Severity	Warning
Recovery Text	1. Unlock the multi-hopper if locks are installed. 2. Install the missing cartridge. 3. Lock the multi-hopper if locks are installed.

Summary

Bar code scanner problem

Summary

L1 supply type problem

Summary

Emboss format error

Error Message no.	126
Message text	Emboss format error
Severity	Critical
Recovery Text	The emboss data sent does not match the format set in the embosser. The card will be canceled.