Error Code 189 - CR500
Summary
Input Hopper Jam card at exit
| Error Message no. | 189 |
| Message text | Input Hopper Jam card at exit |
| Recovery Text | A card is at the hopper exit during hopper reset. Remove the card. |
Error Code 188 - CR500
Summary
Input Hopper Jam print input
| Error Message no. | 188 |
| Message text | Input Hopper Jam print input |
| Recovery Text | A card is already at the entrance of the print unit when another card is to be picked. Remove the card. |
Error Code 196 - SD160, SD260L, SD260, SD260 Pink Printer Preview, SD360, SD460
Summary
Laminator error critical
| Error Message no. | 196 |
| Message text | Laminator error critical |
| Severity | Critical |
| Recovery Text | The laminator has encountered a critical error. The card will be canceled. 1. Press the printer Power button to power off the system. 2. Request service. The system must remain powered off. |
Error Code 159 - CR500
Summary
Print unit card jam
| Error Message no. | 159 |
| Message text | Print unit card jam |
| Severity | Error |
| Recovery Text | Remove the jammed card. Refer to the printer's User's Guide for specific information about clearing a card jam. |
Error Code 155 - CR500
Summary
Room temperature too low
| Error Message no. | 155 |
| Message text | Room temperature too low |
| Severity | Error |
| Recovery Text | Press the User button to clear the message. The card is canceled and moved to the reject area. Use at the recommended operating environment temperature as described in the printer's Installation and Administrator's Guide. |
Error Code 172 - EZ ID System
Summary
Insert cleaning card
| Error Message no. | 172 |
| Message text | Insert cleaning card |
| Severity | Warning |
| Recovery Text | 1. Insert cleaning card. 2. If the card is not immediately picked, press the printer's User button or click OK. |
Error Code 154 - CR500
Summary
Print unit not available
| Error Message no. | 154 |
| Message text | Print unit not available |
| Severity | Error |
| Recovery Text | If the print unit is powered on, press the power button to power it off, wait 15 seconds, and power on again. Make sure that the print unit is powered on. Press the User button to clear the message. |
Error Code 161 - CR500
Summary
Retransfer film problem
| Error Message no. | 161 |
| Message text | Retransfer film problem |
| Severity | Error |
| Recovery Text | The retransfer film is broken. Refer to the printer's User's Guide for information about repairing the retransfer film. Press the User button to clear the message. |
Error Code 179 - FP65i
Summary
Card not received
| Error Message no. | 179 |
| Message text | Card not received |
| Severity | Error |
| Recovery Text | The card was not moved out of the external card reader. Remove the card from the external card reader. |
Error Code 201 - CD800, CD800 CLM, CD820
Summary
L1 supply problem