Close cover to continue. The cover is open or the print ribbon cartridge is missing. Confirm that the print ribbon cartridge is installed and then close the cover.
Magstripe data error. The printer failed to verify that the correct magnetic stripe data was written on the card. 1. Make sure that you are using magnetic stripe cards that match the printer settings....
Magstripe read data error. The printer failed to read the magnetic stripe data from the card. The card will be canceled. 1. Make sure that you are using magnetic stripe cards that match the printer se...
Insert new card side 1 up. 1. Insert a new card in the printer with side 1 facing up. 2. If the card is not immediately picked, press the printers User button or click OK.
Insert same card side 1 up. 1. Take the card from the printer and turn it over end to end so side 1 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the...
Improper shutdown. The printer was not shut down properly. Press and hold the User button to set the printer to Ready. Always use the Power button to power off the printer. Click OK on the PC to clear...
Insert new card side 1 up. 1. Insert a new card in the printer with side 1 facing up. 2. If the card is not immediately picked, press the printers User button or click OK.