Topping foil low. The topping foil has almost reached the end of the roll. Replace the topping foil soon.

Embosser wheel error. The card path is blocked in the embosser. Open the embosser and remove the supply cartridges.Remove any cards found.Replace the cartridges, and then close and lock the embosser.

Indent ribbon break. The embosser indent ribbon is not moving properly. 1. Open the embosser and remove the indent ribbon cartridge. 2. Reposition, repair, or replace the ribbon and advance the repair...

Indent ribbon supplies out. The embosser does not have usable indent ribbon. 1. Open the embosser and remove the indent ribbon cartridge. 2. Install a new indent ribbon. 3. Replace the cartridge, and ...

Indent ribbon low. The indent ribbon has almost reached the end of the roll. Replace the indent ribbon soon.

Embosser card reject full. The embosser reject tray is full. 1. Open the embosser and empty the reject tray. 2. Close and lock the embosser.

Embosser card stack full. The embosser output hopper is full or blocked. Remove cards from the printer output hopper.

Embosser card exit jam. The card path is blocked in the embosser. 1. Open the embosser and remove the supply cartridges. 2. Remove any cards found. 3. Replace the cartridges. 4. Close and lock the emb...

Embosser card entry jam. The card path is blocked in the embosser. 1. Open the embosser and remove the supply cartridges. 2. Remove any cards found. 3. Replace the cartridges, and then close and lock ...

Embosser topper jam. The embosser topping foil is not moving properly. 1. Open the embosser and remove the topping foil cartridge. 2. Reposition, repair, or replace the topping foil. 3. Replace the ca...