Kiosk card lost. The card has been lost in the kiosk. Either the card was not hand fed into the kiosk successfully or a card was removed after a reject initiated.
Printer problem. The printer had an error. The card will be canceled. 1. Press the printer Power button to power off the printer. 2. Press the Power button again to power on the printer.
LCM lost card. The card cannot be located in the LCM. 1. Open the LCM door. 2. Rotate the transport knob counter-clockwise at least 6 turns to move the card out the rear of the LCM. 3. Close the LCM d...
RIM lost card. The card cannot be located in the Rear Indent Module. Power off and unplug the printer and RIM.Remove the RIM supply and the RIM from the printer.Rotate the drive gear to move the card ...
RIM card jam. The card is not in position in the Rear Indent Module. Power off and unplug the printer and RIM.Remove the RIM supply and the RIM from the printer.Rotate the drive gear to move the card ...
Insert cleaning card. 1. Insert cleaning card into exception slot of multi-hopper. 2. If the card is not immediately picked, press the printer's user button or click OK.
UV ribbon requires LCM. The inserted UV ribbon requires an attached Light Cure Module (LCM) for curing. To resolve the issue: 1. Power off the printer. 2. Attach a rear Light Curing Module. 3. Power o...
RIM Supply Error. A RIM supply problem has occurred or the cassette is out of ribbon. Remove supply cassette and address any issues with the supply or install a new supply cassette.