Insert same card side 2 up. 1. Take the card from the printer. 2. Turn the card over end to end so side 2 is facing up. 3. Insert the card in the printer. 4. If the card is not immediately picked, pre...
Insert new card side 2 up. 1. Turn a new card over end to end so side 2 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the printers User button or cli...
Insert new card side 1 up. 1. Insert a new card in the printer with side 1 facing up. 2. If the card is not immediately picked, press the printers User button or click OK.
Magstripe read data error. The printer failed to read the magnetic stripe data from the card. The card will be canceled. 1. Make sure that you are using magnetic stripe cards that match the printer se...
Magstripe data error. The printer failed to verify that the correct magnetic stripe data was written on the card. Make sure that you are using magnetic stripe cards that match the printer settings.Mak...
Print ribbon problem. The print ribbon is not moving properly. 1. Open the printer and remove the ribbon cartridge. 2. Reposition, repair, or replace the ribbon and advance the repaired area one full ...
Laminator not available. The printer and laminator cannot communicate. The card will be canceled. 1. Make sure the data cable from the laminator to the printer is securely plugged in. 2. Press the pri...
Impresser lost card. The card cannot be located in the impresser. Open the impresser door.Remove the supply cartridge.Push the card through the card track and out the impresser back exit slot.
Impresser heater error. The impresser has encountered a critical error. Press the printer Power button to power off the system.Request service. The system must remain powered off.