Printer problem. The printer had an error. The card will be canceled. 1. Press the printer Power button to power off the printer. 2. Press the Power button again to power on the printer.
Insert cleaning card in H2. 1. Unlock the multi-hopper if locks are installed. 2. Remove unused cards and insert the cleaning card in hopper 2. 3. Close and lock (if installed) the multi-hopper. 4. Pr...
Print ribbon problem. The print ribbon is not moving properly. 1. Open the printer and remove the ribbon cartridge. 2. Reposition, repair, or replace the ribbon and advance the repaired area one full ...
Critical problem. The printer had a serious error. The card will be canceled. 1. Press the printer Power button to power off the printer. 2. Request service. The system must remain powered off.
Card not picked. The printer did not pick a card. To complete the current card: For printers with an input hopper Open the input hopper.Add or reposition cards. Close the hopper. For printers with sin...
Card blocking exit sensors. A card is blocking the Kiosk exit sensors. If an external card reader is connected to the embosser: 1. Set up the external card reader to receive the card. 2. Perform error...
Print ribbon out or missing. The printer does not have usable ribbon. To complete the current card: 1. Open the printer and remove the ribbon cartridge. 2. Install a new ribbon and cleaning roller. 3....
Magstripe read no data. The printer did not find any magnetic stripe data on the card. The card will be canceled. 1. Make sure that you are using magnetic stripe cards that match the printer settings....