Topping foil no tag found. The embosser cannot use the topping foil installed. 1. Open the embosser and remove the topping foil cartridge. 2. Install new topping foil. 3. Replace the cartridge, and th...
Embosser topper jam. The embosser topping foil is not moving properly. 1. Open the embosser and remove the topping foil cartridge. 2. Reposition, repair, or replace the topping foil. 3. Replace the ca...
Waiting for laminator temp. This message does not display. The LCD displays the quot;Warming up xx%quot; message. The printer is waiting for the laminator heaters to reach operating temperature.
Flipper module rotate error. The flipper did not reach the required position. 1. Open the printer access door. 2. Press the K3 rear access door release to open the rear access door. 3. Reach in and ro...
Magstripe data not found. The printer did not find magnetic stripe data on card. 1. Make sure that you are using magnetic stripe cards that match the printer settings. 2. Make sure that the cards are ...
Topping foil out. The embosser does not have usable topping foil. 1. Open the embosser and remove the topping foil cartridge. 2. Install new topping foil. 3. Replace the cartridge, and then close and ...