Card not in position. The card is not positioned in the printer correctly. 1. Open the printer and remove the ribbon cartridge. 2. Turn the knob to remove the card. 3. Replace the ribbon cartridge and...
Printer problem. The printer had an error. The card will be canceled. Press the printer Power button to power off the printer.Press the Power button again to power on the printer.
Print unit not available. If the print unit is powered on, press the power button to power it off, wait 15 seconds, and power on again. Make sure that the print unit is powered on. Press the User butt...
Input hopper card jam. One or more cards were in the card track when the printer was powered on. Press the User button to clear the message. The printer attempts to place the card back in the hopper. ...
Clear hopper card track. If the card is in the exception card slot, slide out the exception card slide and remove the card. If one or more cards are in the card track, open the security enclosure door...
Insert same card side 2 up. 1. Take the card from the printer and turn it over end to end so side 2 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the...
Move retransfer film one panel. 1. Take the card from the printer and turn it over end to end so side 2 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press...
Room temperature too low. Press the User button to clear the message. The card is canceled and moved to the reject area. Use at the recommended operating environment temperature as described in the pr...