Skip to main content

Error Code 292 - Sigma Tactile Impression Module


Card jam in the Impresser module

Error Message no. 292
Message text Impresser card jam
Severity Error
Recovery Text The card is not in position in the impresser.
1. Power off and unplug the printer and impresser.
2. Open the impresser and remove the supply cassette.
3. Remove the impresser from the printer.
4. Rotate the drive gear to move the card out of the impresser.
5. Reconnect the impresser and printer, and reinstall the supply cassette.
6. Plug in the power cords and restart the printer.
7. In the Card Printer Driver message, click Retry, or click Cancel to cancel the card.