Skip to main content

Hardware Knowledge Base

Start your search by choosing your product and article type:

Technotes
Bulletins
Discontinuation Notices
Error Codes

Error Code 236 - CR805, CR805 CLM, CR825, CR825 FCP

Error Message no.

236

Message text

Flipper module rotate error

Severity

Error

Recovery text

The flipper did not reach the required position.
  1. Open the printer access door.
  2. Press the K3 rear access door release to open the rear access door.
  3. Reach in and rotate the flipper module until the card is accessible.
  4. Remove the card through the rear access door.
  5. Close the rear access door and then close the printer access door.

How to Videos

*