Drivers

    Version 15.0 Datacard® SP Plus Series Card Printer Driver for 32-bit Microsoft® Windows® operating systems:

    SHA-2 compliant driver supports the following operation systems (latest service pack recommended):

    • Windows® 10
    • Windows® 8.1
    • Windows® 7

    Note: When installing the driver you may be prompted with a warning message, please accept and proceed

    Version 15.0 Datacard® SP Plus Series Card Printer Driver for 64-bit Microsoft® Windows® operating systems:

    SHA-2 compliant driver supports the following operation systems (latest service pack recommended):

    • Windows® 10
    • Windows® 8.1
    • Windows® 7
    • Windows® Server 2008 R2
    • Windows® Server 2013 R2

    Note: When installing the driver you may be prompted with a warning message, please accept and proceed

    Firmware

    Printer Firmware Update Program Version 14.0 for 32-bit Microsoft® Windows® operating systems

    This Firmware Update Program is an application used to update the firmware in SP, CP, SP Plus and CP Plus installed with one of the following Microsoft® operating systems:

    • Windows® 8.1
    • Windows® 7
    • Windows® Server 2008 R2
    • Windows® Server 2012 R2

    The Firmware Update Program requires that the printer be installed with a Printer Driver installed on a supported 32-bit Windows operating system. Use this program, a firmware update with a .fls extension, and the Firmware Update instructions to update the printer's firmware.

    Printer Firmware Update Program Version 14.0 for 64-bit Microsoft® Windows® operating systems

    This Firmware Update Program is an application used to update the firmware in SP, CP, SP Plus and CP Plus installed with one of the following Microsoft® operating systems:

    • Windows® 8.1
    • Windows® 7
    • Windows® Server 2008 R2
    • Windows® Server 2012 R2

    The Firmware Update Program requires that the printer be installed with a Printer Driver installed on a supported 64-bit Windows operating system. Use this program, a firmware update with a .fls extension, and the Firmware Update instructions to update the printer's firmware.

    Go Green Firmware Update for Windows, Open Card and Open Platform Systems

    Datacard® desktop printers and supplies are going green! And at the same time we've updated our Intelligent Supplies Technology™ to enhance the performance of your supplies. In order for the new supplies to work in your existing Datacard desktop printer*, you will simply need to update your firmware.

    Diagnostics

    32-bit, Diagnostics version 15.0 for SP Plus Series Card Printers for Microsoft Windows operating systems

    SHA-2 compliant, diagnostics for Card Printers can be used at the request of your service provider. Download the version of Diagnostics for Card Printers that matches the printer driver version. Diagnostics for Card Printers version 15.0 is for use with SP Plus Series card printers installed on the following Microsoft 32-bit operating systems:

    • Windows® 10
    • Windows® 8.1
    • Windows® 7

    Your service provider might ask you to use Diagnostics to fine-tune printer operations to your requirements, or to help identify whether the printer requires service. Use printer diagnostics only with the guidance of your service provider

    64-bit, Diagnostics version 15.0 for SP Plus Series Card Printers for Microsoft Windows operating systems

    SHA-2 compliant diagnostics for Card Printers can be used at the request of your service provider. Download the version of Diagnostics for Card Printers that matches the printer driver version. Diagnostics for Card Printers version 15.0 is for use with SP Plus Series card printers installed on the following Microsoft 64-bit operating systems:

    • Windows® 10
    • Windows® 8.1
    • Windows® 7
    • Windows Server 2008 R2
    • Windows Server 2012 R2

    Your service provider might ask you to use Diagnostics to fine-tune printer operations to your requirements, or to help identify whether the printer requires service. Use printer diagnostics only with the guidance of your service provider.

    Smart Card Driver

    SCM SCR331DI Dual Interface Firmware Version 7.43

    This is the latest firmware for the newer style SCM SCR331-DI Smart Card reader. SCM's USB Firmware Update Utility is required to download this file to the SCM reader.

    SCM SCR331DI Dual Interface Smartcard Driver Version 5.31

    This is the smartcard driver for the new SCM SCR331-DI Smart Card reader. The previous version of the smartcard driver for the old SCM SCR331-DI Smart Card reader cannot co-exist with the new version. The old version must be deleted before the new version can be installed. Refer to the smartcard manual for installation instructions to install the smartcard driver.

    Sony® FeliCa® reader utility

    Download, install, and use this utility when installing a Sony® FeliCa® reader in a Datacard printer. Use the utility to verify communication between the reader and the PC.

    SCM SCR331DI Dual Interface Smartcard Firmware Version 6.39

    This version of firmware makes the newer style SCM reader act like the older style reader when using a Mifare application which was previously created using the older style reader. The newer style SCM reader is Mifare compliant. As part of this, the authentication method for Mifare changed as well as how the sectors are read.

    It is recommended that customers migrate their application to be Mifare compliant. This will make it much easier for application developers to manage multiple reader types in the future.

    SCM's Developer's Kit document contains the contactless interface of the SCR331-DI to develop applications with contacless smartcards together with the SCR331-DI. The document can be obtained from SCM's website at https://support.identiv.com/scr3310v2/

    SCM's USB Firmware Update Utility is required to download this file to the SCM reader. This utility can also be obtained from SCM's website at https://support.identiv.com/scr3310v2/

    Developer Tools

    XPS Card Printer Driver Software Developers Kit

    The Software Development Kit provides codes samples and documentation to software developers for developing Microsoft Windows applications that work with SD, CD, CE, CL900, CR, Sigma series card printers. It also supports CLM and TIM modules. Samples are provided as source code and compiled binaries for Visual C++, Visual C#, Visual Basic, and Java. Developers who need application control of printing preferences, application control of card movement, or require data from the card must use the SDK.

    NOTE: The v8.2 SDK requires XPS Card Printer Driver v7.3 or later.

    Card Printer Driver 12.0 Software Development Kit (SDK)

    This kit provides codes samples, libraries, and documentation to software developers for developing applications that work with SP Plus Series card printers or CP Plus Series card printers, or the SP Series (SN 00000 through 89999) card printers and CP Series card printers using the 12.x card printer driver (for 32 and 64 bit Windows Vista, Windows 7 and 32 bit Windows XP operating systems) through the printer driver and its API.

    ×

    👋 Hello, if you have any
    questions, I'm ready to chat.

    Chat Now