Summary
| DESCRIPTION | DEFAULT | SDO Notes |
|---|---|---|
| 1) CableCompMaxStrobe | 25 | Even out print density where areas of strong contrast come together. Increase to increase density in most areas. Decrease to reduce unexpected lightness in smaller areas. Could help even out edges on color changes. |
| 2) CardRegistration | 0 | Customer setting. Distance in millimeters (1mm is 0.0394 inch) to move the card after the sensor event before printing. The printer registers the card on the trailing edge. Increase to get the cards under the head if cutting ribbons before printing or on subsequent panels when the cut is clean like a scissors. This is because the edge of the card is one half of the scissors and the head is the other. |
| 3) CardRegistrationCalibration | 1.905 | Setting. Distance in millimeters (1mm is 0.0394 inch) to move the card after the sensor event before printing. The printer registers the card on the trailing edge. |
| 4) ColorAdjustB[0] | 0 | Blue table adjustment values applied to both 98mm and 101mm. |
| 5) ColorAdjustB[1] | 0 | Blue table adjustment values applied to both 98mm and 101mm. |
| 6) ColorAdjustB[2] | 0 | Blue table adjustment values applied to both 98mm and 101mm. |
| 7) ColorAdjustB[3] | 0 | Blue table adjustment values applied to both 98mm and 101mm. |
| 8) ColorAdjustB[4] | 0 | Blue table adjustment values applied to both 98mm and 101mm. |
| 9) ColorAdjustB[5] | 0 | Blue table adjustment values applied to both 98mm and 101mm. |
| 10) ColorAdjustB[6] | 0 | Blue table adjustment values applied to both 98mm and 101mm. |
| 11) ColorAdjustB[7] | 0 | Blue table adjustment values applied to both 98mm and 101mm. |
| 12) ColorAdjustB[8] | 0 | Blue table adjustment values applied to both 98mm and 101mm. |
| 13) ColorAdjustB[9] | 0 | Blue table adjustment values applied to both 98mm and 101mm. |
| 14) ColorAdjustB[10] | 0 | Blue table adjustment values applied to both 98mm and 101mm. |
| 15) ColorAdjustG[0] | 0 | Green table adjustment values applied to both 98mm and 101mm. |
| 16) ColorAdjustG[1] | 0 | Green table adjustment values applied to both 98mm and 101mm. |
| 17) ColorAdjustG[2] | 0 | Green table adjustment values applied to both 98mm and 101mm. |
| 18) ColorAdjustG[3] | 0 | Green table adjustment values applied to both 98mm and 101mm. |
| 19) ColorAdjustG[4] | 0 | Green table adjustment values applied to both 98mm and 101mm. |
| 20) ColorAdjustG[5] | 0 | Green table adjustment values applied to both 98mm and 101mm. |
| 21) ColorAdjustG[6] | 0 | Green table adjustment values applied to both 98mm and 101mm. |
| 22) ColorAdjustG[7] | 0 | Green table adjustment values applied to both 98mm and 101mm. |
| 23) ColorAdjustG[8] | 0 | Green table adjustment values applied to both 98mm and 101mm. |
| 24) ColorAdjustG[9] | 0 | Green table adjustment values applied to both 98mm and 101mm. |
| 25) ColorAdjustG[10] | 0 | Green table adjustment values applied to both 98mm and 101mm. |
| 26) ColorAdjustR[0] | 0 | Red table adjustment values applied to both 98mm and 101mm |
| 27) ColorAdjustR[1] | 0 | Red table adjustment values applied to both 98mm and 101mm |
| 28) ColorAdjustR[2] | 0 | Red table adjustment values applied to both 98mm and 101mm |
| 29) ColorAdjustR[3] | 0 | Red table adjustment values applied to both 98mm and 101mm |
| 30) ColorAdjustR[4] | 0 | Red table adjustment values applied to both 98mm and 101mm |
| 31) ColorAdjustR[5] | 0 | Red table adjustment values applied to both 98mm and 101mm |
| 32) ColorAdjustR[6] | 0 | Red table adjustment values applied to both 98mm and 101mm |
| 33) ColorAdjustR[7] | 0 | Red table adjustment values applied to both 98mm and 101mm |
| 34) ColorAdjustR[8] | 0 | Red table adjustment values applied to both 98mm and 101mm |
| 35) ColorAdjustR[9] | 0 | Red table adjustment values applied to both 98mm and 101mm |
| 36) ColorAdjustR[10] | 0 | Red table adjustment values applied to both 98mm and 101mm |
| 37) ColorManagement | sRGBColorSpace | Use color management in the printer. Choose the type of color management or none. Options: None, sRGBColorSpace, Match SP |
| 38) FanTempOn | 45 | The printhead temperature in degrees C at which to operate the fan. The fan goes on when the temperature is at or above this level. The fan turns off when temperature drops 2 degrees below this value. Lower this to help with wrinkling - starts cooling the head earlier. |
| 39) FPower | 0 | Customer setting. Modify the intensity of printing for the F ribbon panel: Increase to make printed fluorescent thicker or more uniform, decrease to prevent ribbon breaks while printing fluorescent. |