Hardware Knowledge Base

Start your search by choosing your product and article type:

Technotes
Bulletins
Discontinuation Notices
Error Codes

Printer Manager D3.18.1 Printer Setting - Communication Tab

 
DESCRIPTIONDEFAULTSDO Notes
1) CloudMQTTBrokerURI The first server to connect when attempting to connect to the cloud server.
2) CloudMQTTKeepAlive60How often to tell the MQTT broker we are still active.
3) CloudMQTTPort8883The server port used to connect to the MQTT broker.
4) CloudMQTTReceiveTopic The MQTT topics to receive messages from the broker, ; separated.
5) CloudMQTTSocks5Host  
6) CloudMQTTSocks5Password  
7) CloudMQTTSocks5Port3301 
8) CloudMQTTSocks5Username  
9) CloudMQTTTemporaryURI The server to temporarily use for MQTT broker usage.
10) EthAddressMethodDHCPMethod used to obtain the Ethernet network IP Address. When the value is STATIC, EthSubnetMask and EthGatewayAddress can be set. When the value is DHCP, EthIpAddress, EthSubnetMask, and EthGatewayAddress are written automatically.
11) EthDnsAddress10.0.0.0DNS server 1 IP Address for the Ethernet network. When EthAddressMethod is STATIC, you can set this value. When EthAddressMethod is DHCP, the DNS server controls this value.
12) EthDnsAddress20.0.0.0DNS server 2 IP Address for the Ethernet network. When EthAddressMethod is STATIC, you can set this value. When EthAddressMethod is DHCP, the DNS server controls this value.
13) EthDnsSearchSuffix DNS search suffix for the Ethernet network. When EthAddressMethod is STATIC, you can set this value. When EthAddressMethod is DHCP, the DNS server controls this value.
14) EthGatewayAddress0.0.0.0Gateway IP Address for the Ethernet network. When EthAddressMethod is STATIC, you can set this value. When EthAddressMethod is DHCP, the DNS server controls this value.
15) EthIpAddress0.0.0.0IP Address of the Ethernet network. When EthAddressMethod is STATIC, you can set this value. When EthAddressMethod is DHCP, the DNS server provides this value.
16) EthMacAddress MAC Address for the Ethernet network.
17) EthSubnetMask0.0.0.0Subnet Mask for the Ethernet network. When EthAddressMethod is STATIC, you can set this value. When EthAddressMethod is DHCP, the DNS server controls this value.
18) IPModeIPv4Sets the IP stacks that are enabled. Can be IPv4 or IPv4 and IPv6 (Dual Stack).
19) IPv6DefaultGateway::Set a default gateway address.
20) IPv6DHCPv6SelectEnabledSelects whether or not printer obtains an address and stateful configuration from DHCPv6 server.
21) IPv6DNSPrimaryAddress::Primary IPv6 DNS server.
22) IPv6DNSSecondaryAddress::Secondary IPv6 DNS server.
23) IPv6ManualAddress::Manual IPv6 address to be configured when enabled.
24) IPv6ManualPrefixLength64IPv6 manual subnet prefix length.
25) IPv6ManualSelectDisabledSelects whether or not printer configures the manual address given.
26) IPv6StatelessAddrSelectEnabledAllows user to disable system from soliciting router for network prefix used to perform stateless automatic address configuration (SLAAC).
27) MinTLSVersionTLS1_2Minimum TLS protocol support level.
*
Chat Now