Laminator not available. The printer and laminator cannot communicate. The card will be canceled. 1. Make sure the data cable from the laminator to the printer is securely plugged in. 2. Press the pri...
Insert new card side 2 up. 1. Turn a new card over end to end so side 2 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the printers User button or cli...
Improper shutdown. The printer was not shut down properly. 1.Press and hold the User button to set the printer to Ready. Always use the Power button to power off the printer. 2.Click OK on the PC to c...
L2 area card problem. The card is not where it should be in the laminator. 1. Open the laminator and remove the L2 supply cartridge. 2. Turn the knob to remove the card. 3. Replace the supply cartridg...
Improper shutdown. The printer was not shut down properly. Press and hold the User button to set the printer to Ready. Always use the Power button to power off the printer. Click OK on the PC to clear...
Failed to lock. An attempt to lock the printer failed. The card will be canceled. 1. Make sure that all access doors are closed securely. 2. Try locking the printer again.
Insert same card side 1 up. Take the card from the printer and turn it over end to end so side 1 is facing up.Insert the card in the printer.If the card is not immediately picked, press the printers U...
Failed to lock. An attempt to lock the printer failed. The card will be canceled. 1. Make sure that all access doors are closed securely. 2. Try locking the printer again.
