Insert new card side 2 up. 1. Turn a new card over end to end so side 2 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the printers User button or cli...

Firmware version mismatch. The printer and attached component firmware versions are not compatible. The system cannot process cards until the firmware has been updated. Update both the printer and com...

Insert same card side 2 up. 1. Take the card from the printer and turn it over end to end so side 2 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the...

Insert same card side 2 up. 1. Take the card from the printer and turn it over end to end so side 2 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the...

Insert same card side 2 up. 1. Take the card from the printer and turn it over end to end so side 2 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the...

Card not received. The card was not moved out of the external card reader. Remove the card from the external card reader.

Card still in printer. RESERVED

Improper shutdown. The printer was not shut down properly. Press and hold the User button to set the printer to Ready. Always use the Power button to power off the printer.Click OK on the PC to clear ...

Card still in printer. RESERVED

Insert same card side 2 up. 1. Take the card from the printer and turn it over end to end so side 2 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the...