Certificate Services Support

Purpose: SSL/TLS certificate installation guide
For Microsoft Lync 2013


Skip to Installation.

Before you begin...

• Never share private key files. 

• If you plan on using the same certificate on multiple servers always transfer the private key using a secure method (e-mail is not considered a secure method of transfer).

• Make sure you run the SSL Server Test at the end of the installation process to check your certificate configuration against SSL/TLS Best Practices.

• For more information on SSL/TLS Best Practices, click here.

Installing your Entrust SSL/TLS Certificate on Microsoft Lync 2013

1. Click the Download button in the pickup wizard to download your certificate files. Clicking the download button will produce a zip file that includes your Server Certificate, the Entrust chain/intermediate certificates(s) and the Entrust Root certificate. Extract the files from the zip file.

2. On the server, go to Start > Run > type MMC and hit enter.

3. Click File > Add Remove Snap-in.

4. Select Certificates and click Add.

5. Select Local Computer and click Finish.

6. Click Close.

7. Expand Certificates on the left hand side of the console window.

8. Expand the Trusted Root Certification Authorities folder and click on the Certificates sub-folder.

9. Right click on the Certificates sub-folder under Trusted Root Certification Authorities and select All Tasks > Import.

10. In the import wizard, browse to the Root.crt file downloaded in step 1 and complete the wizard.

11. In the MMC console, expand the Intermediate Certification Authorities folder. Right click on the Certificates sub-folder and select All Tasks > Import.

12. In the import wizard, browse to the Intermediate.crt file downloaded in step 1 and complete the wizard.

13. Click on Start, search for the Lync Server Deployment Wizard and open it.
 
14. Click on Install or Update Lync Server System.




15. Click Run under Step 3 (Request, Install, or Assign Certificates).




16. Click on the Import Certificate button to launch the Import Certificate window.




17. Browse to the location of the ServerCertificate1.crt file that you downloaded in step 1 and uncheck the box that says "Certificate file contains the certificate's private key". Click Next.




18. Click Next in the Import Certificate window.
19. Click the Finish button once the task is completed.



 
20. Expand the Default Certificate section and make sure that all of the desired services have been selected. Click Assign.



21. Click Next.

22. If the services assign correctly, the Task Status will show as Completed. Click the Finish button.

If you have any questions or concerns please contact the Entrust Certificate Services Support department for further assistance: 

Hours of Operation:
Sunday 8:00 PM ET to Friday 8:00 PM ET 
North America (toll free): 1-866-267-9297 
Outside North America: 1-613-270-2680 (or see the list below) 
NOTE: It is very important that international callers dial the UITF format exactly as indicated. Do not dial an extra "1" before the "800" or your call will not be accepted as an UITF toll free call.