メインコンテンツまでスキップ

SSL/TLS Certificate Installation Instructions - Microsoft Exchange 2007

User-added image

Purpose: SSL/TLS Certificate Installation Guide

For Microsoft Exchange 2007

User-added image

Need Certificate Signing Request (CSR) help? Please see our technote on how to generate a CSR in Microsoft Exchange 2007 here .

The installation is in two parts:

1) Importing CA certificate using Microsoft Management Console (MMC)

2) Installing the certificate on the server

*Additional Instructions: Microsoft ISA Servers

Part 1 of 2: Importing CA certificate using Microsoft Management Console (MMC)

1. Click the Download button in the pickup wizard to download your certificate files. Clicking the download button will produce a zip file that includes your Server Certificate, the Entrust chain/intermediate certificates(s) and the Entrust Root certificate. Extract the files from the zip file.

2. On the server, go to Start > Run > type MMC and hit enter.

3. Click File > Add Remove Snap-in.

4. Select Certificates and click Add.

5. Select Local Computer and click Finish.

6. Click Close.

7. Expand Certificates on the left hand side of the console window.

8. Expand the Trusted Root Certification Authorities folder and click on the Certificates sub-folder.

9. Right click on the Certificates sub-folder under Trusted Root Certification Authorities and select All Tasks > Import.

10. In the import wizard, browse to the Root.crt file downloaded in step 1 and complete the wizard.

11. In the MMC console, expand the Intermediate Certification Authorities folder. Right click on the Certificates sub-folder and select All Tasks > Import .

12. In the import wizard, browse to the Intermediate.crt file downloaded in step 1 and complete the wizard to complete the certificate chain setup process. You should see your Entrust Intermediate certificates listed in the Intermediate Certification Authorities folder. You are now ready to install your signed server certificate.

Part 2 of 2: Installing the certificate on the server

1. As an Administrator on the server, open the Exchange Management shell by clicking Start > Exchange Management Shell.

2. You will need to run a command to import the Server Certificate file that was downloaded in step 1 and a command to enable the desired Exchange services. This can be done in a single command by using the pipe delimiter. To simplify the command, place your ServerCertificate.crt file in your C drive.

Import-ExchangeCertificate -Path C:\ ServerCertificate.crt | Enable-ExchangeCertificate -Services "SMTP, IMAP, POP, IIS"

3. To verify that the previous command was successful, run the following command:

Get-ExchangeCertificate

This command will display a list of all of the certificates available on the server.  Check the Subject column to identify the certificate that you just imported in the previous step. Check the corresponding Services column to ensure the correct services have been enabled.   In the Services Column:

  • 'S' is the SMTP Service
  • 'I' is the IMAP Service
  • 'P' is the POP Service
  • 'W' is IIS which is used for Webmail and Active Sync

4. If the proper services are not enabled, run the following command and provide your certificate thumprint. The certificate thumprint value should have been part of the output of the Get-ExchangeCertificate command.

Enable-ExchangeCertificate -ThumbPrint [Certificate Thumbprint Value] -Services "SMTP, IMAP, POP, IIS"

*Additional Instructions: Microsoft ISA Server

If you are running Microsoft Internet Security Server (ISA) , you must export your certificate and private key and install it on the ISA server. You can find instructions here .

User-added image Your SSL/TLS certificate should now be installed.

Check that your Certificate has been successfully installed by testing it on the Entrust SSL Install Checker .

If you have any questions or concerns please contact the Entrust Certificate Services Support department for further assistance:

Hours of Operation:
Sunday 8:00 PM ET to Friday 8:00 PM ET
North America (toll free): 1-866-267-9297
Outside North America: 1-613-270-2680 (or see the list below)
NOTE: It is very important that international callers dial the UITF format exactly as indicated. Do not dial an extra "1" before the "800" or your call will not be accepted as an UITF toll free call.

Number
オーストラリア 0011 - 800-3687-7863
1-800-767-513
オーストリア 00 - 800-3687-7863
ベルギー 00 - 800-3687-7863
デンマーク 00 - 800-3687-7863
フィンランド 990 - 800-3687-7863 (Telecom Finland)
00 - 800-3687-7863 (Finnet)
フランス 00 - 800-3687-7863
ドイツ 00 - 800-3687-7863
香港 001 - 800-3687-7863 (Voice)
002 - 800-3687-7863 (Fax)
アイルランド 00 - 800-3687-7863
イスラエル 014 - 800-3687-7863
イタリア 00 - 800-3687-7863
日本 001 - 800-3687-7863 (KDD)
004 - 800-3687-7863 (ITJ)
0061 - 800-3687-7863 (IDC)
Korea 001 - 800-3687-7863 (Korea Telecom)
002 - 800-3687-7863 (Dacom)
マレーシア 00 - 800-3687-7863
オランダ 00 - 800-3687-7863
ニュージーランド 00 - 800-3687-7863
0800-4413101
ノルウェー 00 - 800-3687-7863
シンガポール 001 - 800-3687-7863
スペイン 00 - 800-3687-7863
スウェーデン 00 - 800-3687-7863 (Telia)
00 - 800-3687-7863 (Tele2)
スイス 00 - 800-3687-7863
台湾 00 - 800-3687-7863
英国 00 - 800-3687-7863
0800 121 6078
+44 (0) 118 953 3088