Skip to main content

Printer Manager D3.18.1 Printer Setting - Pick Tab

Printer Manager D3.18.1 Printer Setting - Pick Tab

Summary

Printer Manager D3.18.1 Printer Setting with SDO Notes - Pick Tab


DESCRIPTION DEFAULT SDO Notes
1) CardIntoShuttle 12
2) MotorPWM 85 Pick motor PWM (Pulse Width Modulation)in percent.
3) MultihopperCenterLeftOffset 543
4) MultihopperCenterRightOffset 543
5) MultihopperXHome 4
6) MultihopperXRight 7
7) MultihopperYHome 78
8) MultihopperYUp 91
9) PickAutoTimeout 4000 Number of milliseconds to attempt to pick a card, when the PickMethod is automatic, before declaring a card not picked condition.
10) PickCardOffset 20.32 Distance to move the card using the pick motor, after the input sensor event. The unit is a millimeter (1 mm is 0.040 inch) and the value is a floating point decimal with up to three significant digits, such as 0.812.
11) PickCardOffset1 45
12) PickCardOffset2 45
13) PickCardOffset3 45
14) PickCardOffset4 45
15) PickCardOffset5 45
16) PickCardOffset6 45
17) PickManualTimeout 250 Number of seconds to attempt to pick a card, when the PickMethod is Manual, before declaring a card not picked condition.
18) PickReversePwm 50 PWM (Pulse Width Modulation) at which the pick motor will run in reverse
19) PickReverseTime 250 Milliseconds to run the pick motor in reverse after picking a card, to prevent picking two cards.
20) ShuttleCardSpeed 276
21) ShuttleHorizSpeed 1800
22) ShuttleVertSpeed 1800