Passa al contenuto principale
Immagine
motivo esagonale viola

Software Upgrades

Datacard® DSLR-1 v1.3 Camera Plug in for ID Works, IDCentre, WebID

If you are using ID Works, IDCentre, or WebID and would like to incorporate facial capture functionality with Cannon EOS Rebel T5 / 1200D camera, download and run the attached file.

DSLR v1.3 Camera Plug in uses Canon ED SDK v3.6.1. The EOS Rebel T6 camera has been tested by Entrust Datacard

Entrust Datacard supports the use of DSLR v1.3 camera plug-in software with the following applications:

  • Datacard ID Works® v6.5 (Basic, Standard and Enterprise)
  • Datacard IDCentre™ v6.5 (Bronze, Silver and Gold)
  • Datacard WebID™ Workstation v6 or later

Operating systems supported by the applications listed above are supported by the DSLR v1.3 camera plug-in with the following exceptions:

  • Windows 2000 is not supported by the camera plug-in
  • Windows XP 64-bit is not supported by the camera plug-in

NOTA: Prior to installing v1.3, make sure that previous versions of the plug-in are uninstalled.

When using the camera with ID Works/ID Centre, make sure the dial on the camera is set to P. If this is not set you will not see the menus to configure the camera.

Datacard® DSLR-1 v1.3 Camera Plug in for ID Works, IDCentre, WebID

Datacard® DSLR-2 Camera Plug in for ID Works, IDCentre, WebID

If you are using ID Works, IDCentre, or WebID and would like to incorporate facial capture functionality with Cannon EOS Rebel T5 / 1200D camera, download and run the attached file.

DSLR v1.2 Camera Plug in uses Canon ED SDK v2.14. EOS Rebel T5 camera has been tested by Entrust Datacard.

Entrust Datacard supports the use of DSLR v1.2 camera plug-in software with the following applications:

  • Datacard ID Works® v6.5 (Basic, Standard and Enterprise)
  • Datacard IDCentre™ v6.5 (Bronze, Silver and Gold)
  • Datacard WebID™ Workstation v6 or later

Operating systems supported by the applications listed above are supported by the DSLR v1.2 camera plug-in with the following exceptions:

  • Windows 2000 is not supported by the camera plug-in
  • Windows XP 64-bit is not supported by the camera plug-in

NOTA: When using the camera with ID Works/ID Centre, make sure the dial on the camera is set to P. If this is not set you will not see the menus to configure the camera.

Datacard® DSLR-2 Camera Plug in for ID Works, IDCentre, WebID

DSLR-1 Camera Plug in for ID Works, IDCentre, WebID

If you are using ID Works, IDCentre, or WebID and would like to incorporate facial capture functionality with 1 of 11 Canon® DSLR camera models, download and run the attached file.

The DSLR-1 camera plug-in v1.1 software provides integrated photo capture support for the following Canon cameras:

  • Canon EOS-1D Mark III
  • Canon EOS 40D
  • Canon EOS-1Ds Mark III
  • Canon EOS 450D/Rebel XSi
  • Canon EOS 1000D/Rebel XS
  • Canon EOS 5D Mark II
  • Canon EOS 50D
  • Canon EOS 500D/Rebel T1i
  • Canon EOS 7D
  • Canon EOS-1D Mark IV
  • * Canon EOS 550D/Rebel T2i
  • * Canon EOS 60D
  • * Canon EOS 600D/Rebel T3i
  • Canon EOS 1100D/Rebel T3

* These cameras have been tested by Datacard.

Datacard supports the use of DSLR-1 camera plug-in software with the following applications:

  • Datacard ID Works® v6.5 (Basic, Standard and Enterprise)
  • Datacard ID Works® v5.1 with Service Pack 1 applied (Basic, Standard and Enterprise)
  • Datacard IDCentre™ v6.5 (Bronze, Silver and Gold)
  • Datacard IDCentre™ v5.2 (Bronze, Silver and Gold)
  • Datacard WebID™ Workstation v6 or later

Operating systems supported by the applications listed above are supported by the DSLR-1 camera plug-in with the following exceptions:

  • Windows 2000 is not supported by the camera plug-in.
  • Windows XP 64-bit is not supported by the camera plug-in.

NOTA: When using the camera with ID Works/ID Centre, make sure the dial on the camera is set to P. If this is not set you will not see the menus to configure the camera.

DSLR-1 Camera Plug in for ID Works, IDCentre, WebID