Skip to main content

Hardware Knowledge Base

Start your search by choosing your product and article type:

Discontinuation Notices
Error Codes

MX Series-424


90° Elbow connectors have been released to provide additional options for connecting the waste and overflow hoses to the waste bottle quick connectors.

Suitable PPE should be worn when performing this task, including eye protection and gloves.
  1. Cut current hoses so that approximately 1.25" of hose sits above the quick connects.
  2. Push the elbow connectors, 812167-012 FITTING, PUSH TO CONNECT, 90 DEGREE ELBOW, 6MM, onto the hose ends from the waste bottle.
  3. Pull sufficient hose through the "P" clamps and push into the elbow connectors.
  4. Make sure that the hoses are inserted and secure.
User-added image

User-added image
Entrust Enters Exclusive Discussions to Acquire Onfido