Skip to main content

Hardware Knowledge Base

Start your search by choosing your product and article type:

Discontinuation Notices
Error Codes


Caution: The thermal printhead can be damaged by an electrostatic charge. Discharge yourself by touching the print unit frame before cleaning the printhead.
  1. Prepare the printer.
a. Unlock the printer and open the security enclosure door.
b. Power off the printer.
c. Open the print unit door.
  1. Press the ink ribbon cartridge eject button and remove the ink ribbon cartridge.
  2. Press the retransfer film cartridge eject button and remove the retransfer film cartridge.
  3. Locate the thermal printhead and rollers. The thermal printhead is located in the area between the ink ribbon and retransfer film cartridge slots.
a. Carefully insert the cleaning swab.
b. Gently wipe the thermal printhead.
c. Gently wipe the roller, just above the printhead.
  1. Discard the swab after you finish cleaning the printhead.
Caution: Never use metal or abrasive materials to clean the thermal printhead.
  1. Reinstall the ink ribbon and retransfer film cartridges. Refer to “Prepare the Printer for Use” on page 34 in the CR500 Instant Issuance System User Reference Guide.

User-added image

Entrust Enters Exclusive Discussions to Acquire Onfido