Topping foil problem. The embosser topping foil is not moving properly. The card will be canceled. 1. Open the embosser and remove the topping foil cartridge. 2. Reposition, repair, or replace the top...

Improper shutdown. The printer was not shut down properly. Press and hold the User button to set the printer to Ready. Always use the Power button to power off the printer.Click OK on the PC to clear ...

Embosser indent error. The embosser indent ribbon is not moving properly. 1. Open the embosser and remove the indent ribbon cartridge. 2. Reposition, repair, or replace the ribbon and advance the repa...

L2 area card problem. The card is not where it should be in the laminator. 1. Open the laminator and remove the L2 supply cartridge. 2. Turn the knob to remove the card. 3. Replace the supply cartridg...

Topping foil low. The topping foil has almost reached the end of the roll. Replace the topping foil soon.

Topping foil no tag found. The embosser cannot use the topping foil installed. 1. Open the embosser and remove the topping foil cartridge. 2. Install new topping foil. 3. Replace the cartridge, and th...

Indent ribbon low. The indent ribbon has almost reached the end of the roll. Replace the indent ribbon soon.

Insert cleaning card in H2. 1. Unlock the multi-hopper if locks are installed. 2. Remove unused cards and insert the cleaning card in hopper 2. 3. Close and lock (if installed) the multi-hopper. 4. Pr...

Topping foil problem. The embosser topping foil is not moving properly. The card will be canceled. 1. Open the embosser and remove the topping foil cartridge. 2. Reposition, repair, or replace the top...

Indent ribbon low. The indent ribbon has almost reached the end of the roll. Replace the indent ribbon soon.