Skip to main content

Hardware Knowledge Base

Start your search by choosing your product and article type:

Discontinuation Notices
Error Codes

Artista CR Series - Replace the Cleaning Sleeve

Before You Begin

  • If your printer has locks, unlock the input hopper or printer access door lock. If your printer does not have locks, disregard any instructions that ask you to unlock the printer.
  • When you clean the printer using either the isopropanol or adhesive cleaning card, remove the ink ribbon (C1) and retransfer film (C2) cartridges, and the cleaning sleeve (C3).
  • Some procedures require you to remove only one of the cartridges. Refer to the Cleaning Guide instructions on TrustedCare for complete information.

Replace the Cleaning Sleeve

  1. Remove the ink ribbon (C1) cartridge from the printer.
  2. Lift up the cleaning spindle handle (C3) and pull it straight out from the printer.
  3. Remove the used
User-added image
  1. Slide the new cleaning sleeve onto the cleaning spindle.
User-added image
  1. Remove the protective wrapper from the cleaning sleeve and discard it. 
User-added image
  1. Replace the cleaning spindle in the C3 slot in the printer.
User-added image
  1. Replace the ink ribbon cartridge in the printer and close and lock the printer access door.
Entrust Enters Exclusive Discussions to Acquire Onfido